source: trunk/packages/sipb-xen-chrony-config/files/etc/chrony/chrony.conf.sipb-xen @ 541

Last change on this file since 541 was 353, checked in by broder, 17 years ago

sipb-xen-chrony-config applies the chrony.conf file that I've been using
to make sure that the time stays synced up

Add sipb-xen-chrony-config as a dependency on sipb-xen-console and also
clean up the motd a bit so there's more space

File size: 2.9 KB
Line 
1# This the default chrony.conf file for the Debian chrony package.  It is
2# suitable for a system with an intermittent dial-up connection.  After
3# editing this file use the command 'invoke-rc.d chrony restart' to make
4# your changes take effect. 
5# John Hasler <jhasler@debian.org> 3 Dec. 1998
6
7# See www.pool.ntp.org for an explanation of these servers.  Please
8# consider joining the project if possible.  If you can't or don't want to
9# use these servers I suggest that you try your ISP's nameservers.  We mark
10# the servers 'offline' so that chronyd won't try to connect when the link
11# is down.  Scripts in /etc/ppp/ip-up.d and /etc/ppp/ip-down.d use chronyc
12# commands to switch it on when the link comes up and off when it goes
13# down.  If you have an always-on connection such as cable omit the
14# 'offline' directive and chronyd will default to online.
15
16server time.mit.edu
17server tick.mit.edu
18
19# Look here for the admin password needed for chronyc.  The initial
20# password is generated by a random process at install time.  You may
21# change it if you wish.
22
23keyfile /etc/chrony/chrony.keys
24
25# Set runtime command key.  Note that if you change the key (not the
26# password) to anything other than 1 you will need to edit
27# /etc/ppp/ip-up.d/chrony, /etc/ppp/ip-down.d/chrony, and
28# /etc/cron.weekly/chrony as these scripts use it to get the password.
29
30commandkey 1
31
32# I moved the driftfile to /var/lib/chrony to comply with the Debian
33# filesystem standard.
34
35driftfile /var/lib/chrony/chrony.drift
36
37# Comment this line out to turn off logging.
38
39log tracking measurements statistics
40logdir /var/log/chrony
41
42# Stop bad estimates upsetting machine clock.
43
44maxupdateskew 100.0
45
46# Dump measurements when daemon exits.
47
48dumponexit
49
50# Specify directory for dumping measurements.
51
52dumpdir /var/lib/chrony
53
54# Let computer be a server when it is unsynchronised.
55
56local stratum 10
57
58# Allow computers on the unrouted nets 10 and 192.168 to use the server.
59
60allow 10/8
61allow 192.168/16
62allow 172.16/12
63
64# This directive forces `chronyd' to send a message to syslog if it
65# makes a system clock adjustment larger than a threshold value in seconds.
66
67logchange 0.5
68
69# This directive defines an email address to which mail should be sent
70# if chronyd applies a correction exceeding a particular threshold to the
71# system clock.
72
73# mailonchange root@localhost 0.5
74
75# This directive tells chrony to regulate the real-time clock and tells it
76# Where to store related data.  It may not work on some newer motherboards
77# that use the HPET real-time clock.  It requires enhanced real-time
78# support in the kernel.
79
80rtcfile /var/lib/chrony/chrony.rtc
81
82# If the last line of this file reads 'rtconutc' chrony will assume that
83# the CMOS clock is on UTC (GMT).  If it reads '# rtconutc' or is absent
84# chrony will assume local time.  The line (if any) was written by the
85# chrony postinst based on what it found in /etc/default/rcS.  You may
86# change it if necessary.
87rtconutc
Note: See TracBrowser for help on using the repository browser.