source: trunk/packages/invirt-autoinstaller/debian/changelog @ 2910

Last change on this file since 2910 was 2844, checked in by gdb, 15 years ago

Don't hardcode netmask and gateway

File size: 10.3 KB
Line 
1invirt-autoinstaller (0.0.33) unstable; urgency=low
2
3  * Don't hardcode netmask and gateway
4
5 -- Greg Brockman <gdb@mit.edu>  Fri, 01 Jan 2010 23:31:55 -0500
6
7invirt-autoinstaller (0.0.32) unstable; urgency=low
8
9  * Revert 0.0.31 - it didn't work, and left autoinstalled VMs that used
10    to work without anything in their grub menu.lst.
11
12 -- Evan Broder <broder@mit.edu>  Thu, 13 Aug 2009 08:35:50 -0700
13
14invirt-autoinstaller (0.0.31) unstable; urgency=low
15
16  * Hack to be differently specific when replacing the root= lines. This
17    should replace both the actual grub config lines and the kopt line,
18    but leave lines like groot alone.
19
20 -- Evan Broder <broder@mit.edu>  Tue, 28 Jul 2009 14:39:25 -0700
21
22invirt-autoinstaller (0.0.30) unstable; urgency=low
23
24  * When we're installing the world, be sure to block debconf prompts from
25    coming up.
26
27 -- Evan Broder <broder@mit.edu>  Sun, 26 Jul 2009 19:59:01 -0700
28
29invirt-autoinstaller (0.0.29) unstable; urgency=low
30
31  * Be more specific when replacing root= lines with UUID equivalents in
32    the grub menu.lst. This avoids replacing things like groot, which
33    makes pygrub unhappy.
34
35 -- Evan Broder <broder@mit.edu>  Sat, 13 Jun 2009 19:33:01 -0700
36
37invirt-autoinstaller (0.0.28) unstable; urgency=low
38
39  * We're using bashisms in 93-setup-grub, so let's use bash.
40
41 -- Evan Broder <broder@mit.edu>  Sun, 03 May 2009 02:40:54 -0400
42
43invirt-autoinstaller (0.0.27) unstable; urgency=low
44
45  * Correctly detect what the path to the block devices in fstab are.
46  * Never prompt when updating the grub config after frobbing it.
47
48 -- Evan Broder <broder@mit.edu>  Sun, 03 May 2009 01:40:55 -0400
49
50invirt-autoinstaller (0.0.26) unstable; urgency=low
51
52  * Switch the grub config and /etc/fstab to using UUIDs for specifying
53    the boot and swap partitions.
54
55 -- Evan Broder <broder@mit.edu>  Sun, 03 May 2009 01:18:45 -0400
56
57invirt-autoinstaller (0.0.25) unstable; urgency=low
58
59  * Uh...right. Let's edit the event.d file and menu.lst within the
60    install prefix for Intrepid/Jaunty.
61
62 -- Evan Broder <broder@mit.edu>  Sun, 03 May 2009 00:14:50 -0400
63
64invirt-autoinstaller (0.0.24) unstable; urgency=low
65
66  * Add a new version of our patches to work with the current Ubuntu
67    update-grub, instead of trying to use the indomU variable (which still
68    excludes kernels from showing up in the menu.lst).
69
70 -- Evan Broder <broder@mit.edu>  Sat, 02 May 2009 23:45:03 -0400
71
72invirt-autoinstaller (0.0.23) unstable; urgency=low
73
74  * Create the shell of a menu.lst file needed to successfully parse
75    indomU=true out of it.
76
77 -- Evan Broder <broder@mit.edu>  Sat, 02 May 2009 22:56:30 -0400
78
79invirt-autoinstaller (0.0.22) unstable; urgency=low
80
81  * For Jaunty systems, edit /boot/grub/menu.lst appropriately to work
82    with the fix for LP #291256.
83
84 -- Evan Broder <broder@mit.edu>  Sat, 02 May 2009 22:20:29 -0400
85
86invirt-autoinstaller (0.0.21) unstable; urgency=low
87
88  * Create xen-tools symlinks for installing Intrepid and Jaunty.
89
90 -- Evan Broder <broder@mit.edu>  Sat, 02 May 2009 21:41:43 -0400
91
92invirt-autoinstaller (0.0.20) unstable; urgency=low
93
94  * Update the setup-grub hook to work with pv_ops Ubuntu kernels.
95
96 -- Evan Broder <broder@mit.edu>  Sat, 02 May 2009 21:33:44 -0400
97
98invirt-autoinstaller (0.0.19) unstable; urgency=low
99
100  * fix symlinks
101
102 -- Greg Price <price@mit.edu>  Thu, 19 Feb 2009 03:15:03 -0500
103
104invirt-autoinstaller (0.0.18) unstable; urgency=low
105
106  * Renumber our 9x-* hook scripts to make some room.
107  * Move 36-clear-root-password to 96- so it sticks.
108
109 -- Greg Price <price@mit.edu>  Thu, 19 Feb 2009 03:03:39 -0500
110
111invirt-autoinstaller (0.0.17) unstable; urgency=low
112
113  * Unset root password in xen-create-image.
114  * Don't bother unsetting the password in the installer image, because it
115    doesn't actually affect the guest.
116
117 -- Greg Price <price@mit.edu>  Wed, 18 Feb 2009 22:12:26 -0500
118
119invirt-autoinstaller (0.0.16) unstable; urgency=low
120
121  * Unset root password in guest, so it's unset in autoinstalled images.
122
123 -- Greg Price <price@mit.edu>  Wed, 18 Feb 2009 02:39:29 -0500
124
125invirt-autoinstaller (0.0.15) unstable; urgency=low
126
127  * Poke policy-rc.d while using aptitude so we don't try to start daemons.
128
129 -- Greg Price <price@mit.edu>  Wed, 18 Feb 2009 00:30:45 -0500
130
131invirt-autoinstaller (0.0.14) jaunty; urgency=low
132
133  * Don't confuse MB with MiB.
134
135 -- Anders Kaseorg <andersk@mit.edu>  Tue, 17 Feb 2009 04:56:38 -0500
136
137invirt-autoinstaller (0.0.13) unstable; urgency=low
138
139  * Don't hang indefinitely waiting for input from a user that can't talk
140    to you.
141
142 -- Evan Broder <broder@mit.edu>  Sun, 15 Feb 2009 03:54:10 -0500
143
144invirt-autoinstaller (0.0.12) unstable; urgency=low
145
146  * TTANTS: Conflicts. Depends.
147
148 -- Evan Broder <broder@mit.edu>  Sat, 14 Feb 2009 22:38:48 -0500
149
150invirt-autoinstaller (0.0.11) unstable; urgency=low
151
152  * Require aptitude in the autoinstaller guest - and use it in
153    invirt-update-ai-guest.
154
155 -- Evan Broder <broder@mit.edu>  Sat, 14 Feb 2009 22:32:32 -0500
156
157invirt-autoinstaller (0.0.10) unstable; urgency=low
158
159  * Serial consoles are supposed to run at 115200 baud, not 115300.
160  * Install a more complete base system on Debian.
161
162 -- Evan Broder <broder@mit.edu>  Sat, 14 Feb 2009 21:29:07 -0500
163
164invirt-autoinstaller (0.0.9) unstable; urgency=low
165
166  * xen-utils recommends a Xen hypervisor. We don't want one.
167
168 -- Evan Broder <broder@mit.edu>  Sat, 31 Jan 2009 23:39:06 -0500
169
170invirt-autoinstaller (0.0.8) unstable; urgency=low
171
172  * Actually install a useful base system by pulling in ubuntu-minimal and
173    ubuntu-standard (sorry, Debian).
174
175 -- Evan Broder <broder@mit.edu>  Sat, 31 Jan 2009 22:51:00 -0500
176
177invirt-autoinstaller (0.0.7) unstable; urgency=low
178
179  * Add a script to update the autoinstaller disk from a host.
180  * Use a more stringent regexp and fail loudly if the match fails.
181  * Turn off transmission segmentation offloading instead of tx checksum
182    offloading
183
184 -- Evan Broder <broder@mit.edu>  Mon, 26 Jan 2009 20:57:09 -0500
185
186invirt-autoinstaller (0.0.6) unstable; urgency=low
187
188  * Correct for the checksumming issue in /etc/network/interfaces instead
189    of /etc/rc.local
190
191 -- Evan Broder <broder@mit.edu>  Mon, 26 Jan 2009 07:40:30 -0500
192
193invirt-autoinstaller (0.0.5) unstable; urgency=low
194
195  * Install Debian and Ubuntu compatible kernels without checking first
196
197 -- Evan Broder <broder@mit.edu>  Wed, 19 Nov 2008 20:51:20 -0500
198
199invirt-autoinstaller (0.0.4) unstable; urgency=low
200
201  * Figure out whether the autoinstaller is running on Debian or Ubuntu,
202    and install an appropriate kernel
203
204 -- Evan Broder <broder@mit.edu>  Wed, 19 Nov 2008 19:53:25 -0500
205
206invirt-autoinstaller (0.0.3) unstable; urgency=low
207
208  * Whoops - replace the right string in /etc/rc.local
209
210 -- Evan Broder <broder@mit.edu>  Fri, 14 Nov 2008 01:59:11 -0500
211
212invirt-autoinstaller (0.0.2) unstable; urgency=low
213
214  * Add hook to turn off checksumming in guests
215
216 -- Evan Broder <broder@mit.edu>  Fri, 14 Nov 2008 01:19:21 -0500
217
218invirt-autoinstaller (0.0.1) unstable; urgency=low
219
220  * sipb-xen-autoinstaler -> invirt-autoinstaller
221  * Punt DEB_AUTO_UPDATE_DEBIAN_CONTROL
222
223 -- Evan Broder <broder@mit.edu>  Sat, 01 Nov 2008 04:47:25 -0400
224
225sipb-xen-autoinstaller (2.11) unstable; urgency=low
226
227  * sipb-xen-dom0 -> invirt-xen-config
228
229 -- Evan Broder <broder@mit.edu>  Sat, 25 Oct 2008 18:18:51 -0400
230
231sipb-xen-autoinstaller (2.10) unstable; urgency=low
232
233  * Hide misleading harmless error message from dmsetup
234  * Start udev in guest, so /dev/hda[12] appear automatically
235  * understand 'noinstall=' rather than 'noinstall', so validator on
236    remote accepts it
237
238 -- Greg Price <price@mit.edu>  Sun, 19 Oct 2008 21:26:31 -0400
239
240sipb-xen-autoinstaller (2.9) unstable; urgency=low
241
242  * Run xen-create-image with --verbose so you actually get useful
243    output
244
245 -- Evan Broder <broder@mit.edu>  Tue, 14 Oct 2008 19:25:14 -0400
246
247sipb-xen-autoinstaller (2.8) unstable; urgency=low
248
249  * Correctly evaluate the kernel command line to deal with weird
250    potential quoting issues
251
252 -- Evan Broder <broder@mit.edu>  Mon, 13 Oct 2008 21:18:22 -0400
253
254sipb-xen-autoinstaller (2.7) unstable; urgency=low
255
256  * Skip kpartx call when running on physical devices
257
258 -- Evan Broder <broder@mit.edu>  Tue, 07 Oct 2008 00:25:18 -0400
259
260sipb-xen-autoinstaller (2.6) unstable; urgency=low
261
262  * Update dependencies for Hardy
263
264 -- Evan Broder <broder@mit.edu>  Mon, 06 Oct 2008 18:22:08 -0400
265
266sipb-xen-autoinstaller (2.5) unstable; urgency=low
267
268  * Add sipb-xen-autoinstaller-host binary package
269  * Put common files in both binary packages
270  * Add beginnings of an installer script in -host package
271
272 -- Greg Price <price@mit.edu>  Sun, 28 Sep 2008 17:07:51 -0400
273
274sipb-xen-autoinstaller (2.4) unstable; urgency=low
275
276  * Switch to using just sipb-database options on the host
277
278 -- Eric Price <ecprice@sipb-xen-dev.mit.edu>  Mon, 28 Jul 2008 03:18:00 -0400
279
280sipb-xen-autoinstaller (2.3) unstable; urgency=low
281
282  * Fix a couple bugs.
283
284 -- Eric Price <ecprice@sipb-xen-dev.mit.edu>  Mon, 28 Jul 2008 01:06:18 -0400
285
286sipb-xen-autoinstaller (2.2) unstable; urgency=low
287
288  * Divert /etc/init.d/rcS
289
290 -- Eric Price <ecprice@sipb-xen-dev.mit.edu>  Mon, 28 Jul 2008 00:28:54 -0400
291
292sipb-xen-autoinstaller (2.1) unstable; urgency=low
293
294  * Updates to the dependency lists.
295
296 -- Eric Price <ecprice@sipb-xen-dev.mit.edu>  Mon, 28 Jul 2008 00:02:39 -0400
297
298sipb-xen-autoinstaller (2.0) unstable; urgency=low
299
300  * Move the autoinstall inside a VM.
301
302 -- Eric Price <ecprice@mit.edu>  Sun, 27 Jul 2008 23:47:02 -0400
303
304sipb-xen-guest-installer (1.4) unstable; urgency=low
305
306  * sipb-xen-install, using xen-create-image, which uses debootstrap
307    (ecprice, neboat, and me, weeks ago)
308
309 -- Greg Price <price@mit.edu>  Wed, 23 Jul 2008 01:15:58 -0400
310
311sipb-xen-guest-installer (1.3) unstable; urgency=low
312
313  * Change sipb-xen-lvcopy so that it fails if you try to clone
314    anything but ice3
315
316 -- Evan Broder <broder@mit.edu>  Sat, 31 May 2008 13:38:37 -0700
317
318sipb-xen-guest-installer (1.2) unstable; urgency=low
319
320  * Work around bug in Python subprocess.
321
322 -- Eric Price <ecprice@sipb-xen-dev.mit.edu>  Thu, 15 May 2008 18:46:57 -0400
323
324sipb-xen-guest-installer (1.1) unstable; urgency=low
325
326  * All the changes since last October.  In particular:
327  * This system is in "production", using sx-lvcopy to replicate
328    a golden image on user request and frob it as necessary.
329
330 -- Greg Price <price@mit.edu>  Thu,  1 May 2008 01:09:11 -0400
331
332sipb-xen-guest-installer (1.0) unstable; urgency=low
333
334  * Initial release.
335
336 -- Greg Price <price@mega-man.mit.edu>  Tue, 16 Oct 2007 03:01:08 -0400
Note: See TracBrowser for help on using the repository browser.