source: package_tags/invirt-xen-config/0.0.6/vif-invirtroute @ 1301

Last change on this file since 1301 was 1258, checked in by broder, 16 years ago

Rearrange invirt-xen-config

  • Property svn:executable set to *
File size: 2.7 KB
Line 
1#!/bin/bash
2
3
4
5
6
7#============================================================================
8# /etc/xen/vif-route
9#
10# Script for configuring a vif in routed mode.
11# The hotplugging system will call this script if it is specified either in
12# the device configuration given to Xend, or the default Xend configuration
13# in /etc/xen/xend-config.sxp.  If the script is specified in neither of those
14# places, then vif-bridge is the default.
15#
16# Usage:
17# vif-route (add|remove|online|offline)
18#
19# Environment vars:
20# vif         vif interface name (required).
21# XENBUS_PATH path to this device's details in the XenStore (required).
22# Read from the store:
23# ip      list of IP networks for the vif, space-separated (default given in
24#         this script).
25# V6PREFIX  prefix of v6 address to use
26# Note that the v6 support is kind of broken because there's not really a way to populate the v6 prefix
27# This script will set up proxy arp  for any ip addresses that are being routed
28# type read to determine if the device is ioemu
29
30#============================================================================
31
32dir=$(dirname "$0")
33. "$dir/vif-common.sh"
34
35main_ip=$(dom0_ip)
36dev=${dev:-${vif}}
37
38case "$command" in
39    online)
40        ifconfig ${dev} ${main_ip} netmask 255.255.255.255 up
41        echo 1 >/proc/sys/net/ipv4/conf/${dev}/proxy_arp
42        echo 1 >/proc/sys/net/ipv4/conf/${dev}/rp_filter
43        ethtool -K ${dev} tx off
44        ipcmd='add'
45        cmdprefix=''
46        ;;
47    offline)
48        do_without_error ifdown ${vif}
49        if [ -f /var/run/radvd/radvd.pid.${vif} ] ; then
50            do_without_error kill `cat /var/run/radvd/radvd.pid.${vif}`
51            fi
52        ipcmd='del'
53        cmdprefix='do_without_error'
54        ;;
55esac
56
57v6prefix=${v6prefix:-}
58v6prefix=$(xenstore_read_default "$XENBUS_PATH/v6prefix" "$v6prefix")
59vif_type=$(xenstore_read_default "$XENBUS_PATH/type" "viffront")
60if [  ${vif_type} != "ioemu"  -o  x${qemu_online} = xyes ] ; then
61    if [ "${ip}" ] ; then
62    # If we've been given a list of IP addresses, then add routes from dom0 to
63    # the guest using those addresses.
64        for addr in ${ip} ; do
65            ${cmdprefix} ip route ${ipcmd} ${addr} dev ${dev} src ${main_ip}
66            arpspoof -i eth2 -t 18.181.0.1 ${addr}&
67            sleep 5
68            kill %arpspoof
69        done
70    fi
71
72    if [ x${v6prefix} != x ] ; then
73        sed -e "s/@interface@/${dev}/" -e "s+@prefix@+${v6prefix}+" /etc/xen/radvd.conf.template >/var/run/radvd.conf.${vif}
74        ${cmdprefix} ip -6 addr  ${ipcmd}  fe80::/64 scope link  dev ${dev} 
75        if [ $1 = online ] ; then
76            radvd  -u radvd -C /var/run/radvd.conf.${vif} -p /var/run/radvd/radvd.pid.${vif}
77        fi
78        ${cmdprefix} ip -6 route ${ipcmd} ${v6prefix} dev ${dev} 
79    fi
80fi
81
82handle_iptable
83
84log debug "Successful vif-route $command for $vif."
85if [ "$command" == "online" ]
86then
87  success
88fi
Note: See TracBrowser for help on using the repository browser.