source: branches/wsgi/packages/sipb-xen-dom0/xend-config.sxp @ 2434

Last change on this file since 2434 was 59, checked in by hartmans, 17 years ago

New package to represent dom0 configuration

File size: 4.4 KB
Line 
1# -*- sh -*-
2
3#
4# Xend configuration file.
5#
6
7# This example configuration is appropriate for an installation that
8# utilizes a bridged network configuration. Access to xend via http
9# is disabled. 
10
11# Commented out entries show the default for that entry, unless otherwise
12# specified.
13
14#(logfile /var/log/xen/xend.log)
15#(loglevel DEBUG)
16
17#(xend-http-server no)
18#(xend-unix-server no)
19#(xend-tcp-xmlrpc-server no)
20#(xend-unix-xmlrpc-server yes)
21#(xend-relocation-server no)
22
23#(xend-unix-path /var/lib/xend/xend-socket)
24
25# Port xend should use for the HTTP interface, if xend-http-server is set.
26#(xend-port            8000)
27
28# Port xend should use for the relocation interface, if xend-relocation-server
29# is set.
30#(xend-relocation-port 8002)
31
32# Address xend should listen on for HTTP connections, if xend-http-server is
33# set.
34# Specifying 'localhost' prevents remote connections.
35# Specifying the empty string '' (the default) allows all connections.
36#(xend-address '')
37#(xend-address localhost)
38
39# Address xend should listen on for relocation-socket connections, if
40# xend-relocation-server is set.
41# Meaning and default as for xend-address above.
42#(xend-relocation-address '')
43
44# The hosts allowed to talk to the relocation port.  If this is empty (the
45# default), then all connections are allowed (assuming that the connection
46# arrives on a port and interface on which we are listening; see
47# xend-relocation-port and xend-relocation-address above).  Otherwise, this
48# should be a space-separated sequence of regular expressions.  Any host with
49# a fully-qualified domain name or an IP address that matches one of these
50# regular expressions will be accepted.
51#
52# For example:
53#  (xend-relocation-hosts-allow '^localhost$ ^.*\.example\.org$')
54#
55#(xend-relocation-hosts-allow '')
56
57# The limit (in kilobytes) on the size of the console buffer
58#(console-limit 1024)
59
60##
61# To bridge network traffic, like this:
62#
63# dom0: fake eth0 -> vif0.0 -+
64#                            |
65#                          bridge -> real eth0 -> the network
66#                            |
67# domU: fake eth0 -> vifN.0 -+
68#
69# use
70#
71# (network-script network-bridge)
72#
73# Your default ethernet device is used as the outgoing interface, by default.
74# To use a different one (e.g. eth1) use
75#
76# (network-script 'network-bridge netdev=eth1')
77#
78# The bridge is named xenbr0, by default.  To rename the bridge, use
79#
80# (network-script 'network-bridge bridge=<name>')
81#
82# It is possible to use the network-bridge script in more complicated
83# scenarios, such as having two outgoing interfaces, with two bridges, and
84# two fake interfaces per guest domain.  To do things like this, write
85# yourself a wrapper script, and call network-bridge from it, as appropriate.
86#
87(network-script network-bridge)
88
89# The script used to control virtual interfaces.  This can be overridden on a
90# per-vif basis when creating a domain or a configuring a new vif.  The
91# vif-bridge script is designed for use with the network-bridge script, or
92# similar configurations.
93#
94# If you have overridden the bridge name using
95# (network-script 'network-bridge bridge=<name>') then you may wish to do the
96# same here.  The bridge name can also be set when creating a domain or
97# configuring a new vif, but a value specified here would act as a default.
98#
99# If you are using only one bridge, the vif-bridge script will discover that,
100# so there is no need to specify it explicitly.
101#
102(vif-script vif-bridge)
103
104
105## Use the following if network traffic is routed, as an alternative to the
106# settings for bridged networking given above.
107#(network-script network-route)
108#(vif-script     vif-route)
109
110
111## Use the following if network traffic is routed with NAT, as an alternative
112# to the settings for bridged networking given above.
113#(network-script network-nat)
114#(vif-script     vif-nat)
115
116
117# Dom0 will balloon out when needed to free memory for domU.
118# dom0-min-mem is the lowest memory level (in MB) dom0 will get down to.
119# If dom0-min-mem=0, dom0 will never balloon out.
120(dom0-min-mem 196)
121
122# In SMP system, dom0 will use dom0-cpus # of CPUS
123# If dom0-cpus = 0, dom0 will take all cpus available
124(dom0-cpus 0)
125
126# Whether to enable core-dumps when domains crash.
127#(enable-dump no)
128
129# The tool used for initiating virtual TPM migration
130#(external-migration-tool '')
131
132# The interface for VNC servers to listen on. Defaults
133# to 127.0.0.1  To restore old 'listen everywhere' behaviour
134# set this to 0.0.0.0
135#(vnc-listen '127.0.0.1')
Note: See TracBrowser for help on using the repository browser.